Love to garden, but don't have the time? We suggest relying on timers!
Grow light timers, hydroponic timers, CO2 timers... Timers for
most everything!
Timers will remember to turn stuff on and turn stuff off,
so you won't have to remember those daily (or hourly) chores. Timers will get it done for you!
The C.A.P. ART-DNe adjustable recycling timer controls any application requiring a device to be turned ON and OFF at precise intervals. Replaces the previous verions of CAP ART-2 and ART-3 timers.
The C.A.P. MLC-12X+4 Master Lighting Controller controls up to TWELVE 1000-watt HID lights from a single trigger cord. Plug the 120V trigger cable into a standard 24-hour timer or control device to manage all 12 grow light systems at once!
The C.A.P. MLC-16X Master Light Controller is for the large scale grower. It controls up to SIXTEEN 1000-watt HID lights from one time-clock or controller. Each bank of 4 outlets is protected by a 20 amp circuit breaker.
The C.A.P. MLC-24X Master Lighting Controller is the largest scale model available from CAP. It allows you to manage up to twenty-four 1000-watt HID grow lights from one 120 amp, 240 volt power source.
The C.A.P. MLC-4X allows you to control up to FOUR 1000-watt HID lights from from one time-clock or controller. Run 30 amp, 120/240 volt power into the MLC-4X Master Lighting Controller and all of the outlets are controlled by one 120 volt trigger cable.
The C.A.P. MLC-8XT master lighting controller allows you to control up to EIGHT 1000 watt HID lights from one 40 amp, 240 volt power source using one time-clock or controller. Use 40 amp, 240 volt power into the MLC-8XT, and all of the outlets are controlled by the integrated time clock.
The C.A.P. NFT series fixed cycle timers are the simplest devices available for turning a device ON and OFF at precise intervals. No hardwiring needed - both the NFT-1e and NFT-2e are plug-n-play to use any standard electrical outlet . The equipment being controlled plugs into the front of the preset recycling timer.
C.A.P. PTC-1 and PTC-2 Photocontrollers are perfect when you need to turn something ON only during daylight hours or only at night. A photocell senses whether it is day or night, and turns the device plugged into it On or OFF depending on which model you are using.
The CAP XBF-2 Xtreme Ballast Flip allows you to run two 1000-watt lights using only one ballast. Each reflector plugs into the right side, then the ballast connects on the left side.
For the basics in garden room control the Green Air 24-CT-1 might be just what you need. This handy item incorporates two of the more common requirements of a small enclosure.
The Cyclestat repeat cycle timers have solved the age old problem of accurate short cycle timing. Perfect for plant zone environments, reptile habitats or any other application requiring automatic short cycle switching.
Green Air LT4-120 or LT8-240 Lighting Controllers are designed to operate 4 high load lighting equipment. They consist of a premium quality precision synchronous clock motor and a high amperage switching circuit.
The Green Air PS-1 Photostat is used to turn equipment "Off" during a photo "Off" period (night operation). When the lights are "Off" the control equipment will be powered down. In this mode the Photostat is ideal for use in CO2 generation.
The GrowColt Un-grounded Repeat Cycle timer allows you to cycle your equipment using 50-second intervals. Each pin represents 50 seconds of time - UP for ON, DOWN for OFF. It completes one revolution every 40 minutes.
The Horti-Control LF-2 Flip Flop controls two ballasts tied into four reflectors and bulbs. It works well with both magnetic core and digital ballasts.
The Horti-Control LF-4 Flip Flop controls four ballasts tied into eight reflectors and bulbs. It works well with both magnetic core and digital ballasts.
The Horti-Control LF-6 Flip Flop controls six ballasts tied into twelve reflectors and bulbs. It works well with both magnetic core and digital ballasts.
For gardeners who are using 240V equipment, this is the timer you need. Intermatic's 240-volt, 15 Amp timer helps you conveniently automate your HID lighting.
The Powerbox DPC-12000 is a versatile 240-volt lighting controller that can effortlessly run up to ten 240-volt, 1,000 watt grow light systems simultaneously, plus you have five 120-volt outlets for auxillary equipment.
The Powerbox DPC-7500-120V lighting controller connects to 240-volt service, but provides six 120-volt outlets so you can run up to six simultaneous 1,000W grow light systems on 60 amps at 120-volts.
The Powerbox DPC-7500-240V is a versatile 240-volt lighting controller that can effortlessly run up to six 240-volt, 1,000 watt grow light systems simultaneously.
Double your growing power without the cost of six additional ballasts or electrical outlets! The Powerbox Flipbox LSM-12 is 6 ballast, 12 light Flipbox that allows you to run 12 lights on 6 ballasts from 30 amps at 240 volts.
The Powerbox Flipbox lets you double your growing power without the cost of a second ballast! Using only one ballast, the Flipbox will power two separate HID reflectors with lamps on alternating 12-hour shifts.
The Sentinel HID-2 grow light controller is the simplest model to set up. It features a 24-hour digital time-clock that is extremely accurate and easy to use. There's even a battery backup in case of power outages.
When you're growing with multiple HID (High Intensity Discharge) lighting systems, you can either connect a timer to each one, or use just one timer connected to the Sentinel HPH-4 High Power HID controller to control up to four systems at the same time.
The Sentinel MDT-1 combines two timer functions into one unit - it controls supplemental lighting, 120 volt devices that have to be "recycled" ON and OFF at precise intervals, plus nighttime (or when lights off) operations. This 100% digital and programmable timer has an easy-to-use menu, simple pushbutton programming and a bright LED display that's easy to read.
The Sunleaves SunDial3 Digital Multi-Timer has one 120V outlet and is accurate to the second. It has a minimum cycle of one minute and a maximum of up to seven days.
The Sunlight Supply 30 Amp Timer Box lets you operate up to four 1000W HID light systems AND up to 10 amps of growroom accessories - all from the same timer!
The Titan Controls Helios 15 light controller runs eight (8) 240-Volt ballasts for a maximum 8000 watts of HID lighting over your plants. NEMA 6-15 outlets accept only 240V cordsets. This model has a built-in timer.
The Titan Controls Helios 2 light controller runs four (4) 120-Volt ballasts for a maximum 4000 watts of HID lighting over your garden. It works with magnetic or digital ballasts. EMA 5-20 outlets accept only 120V cordsets.
The Titan Controls Helios 3 light controller runs four (4) 240-Volt ballasts for a maximum 4000 watts of HID lighting over your garden. It works with magnetic or digital ballasts. Universal multi-tap outlets allow total flexibility to accept either 120V or 240V cordsets.
The Titan Controls Helios 6 light controller runs eight (8) 240-Volt ballasts for a maximum 8000 watts of HID lighting over your garden. It works with either magnetic or digital ballasts. NEMA 6-15 outlets accept only 240V cordsets.
The Titan Controls Helios 8 light controller runs eight (8) 240-Volt ballasts for a maximum 8000 watts of HID lighting over your garden. It works with either magnetic or digital ballasts. Multi-tap outlets will accept either 120V or 240V cordsets.
Love to garden, but don't have the time? We suggest relying on timers!
